REQUEST FURTHER INFORMATION

Contact us for further information about our turbine optical pyrometry systems.

CONTACT US

PROBE SPECIFIC OVERVIEW

Where turbine conditions are severe, and gas temperatures are very high, the articulating mirror system is offered. This system is designed to maximise the scanned area whilst minimising the depth of probe immersion.

A pyrometer probe which contains an articulating mirror is mounted within a pneumatic actuator. The probe diameter is larger than the fixed mirror to accommodate the mirror's movement mechanism. The pneumatic system inserts the pyrometer probe a small distance into the gas stream and data is then collected continuously as the mirror is driven through its full range of movement.

Scans can be performed in less than 20 seconds which result in high resolution 2 dimensional thermal maps. These thermal maps are frequently used by OEMs for their verification and validation programmes.

Rotadata Pyrometry Services

The Rotadata Articulating Mirror System includes:

  • Preliminary evaluation stage to determine optimal solution
  • 3D heat mapping, gas flow analysis and heat transfer analysis
  • Probe design to meet environmental requirements
  • Probe calibration
  • Supply of calibration equipment, training and tools
  • Design and supply of engine interface parts
  • System hardware production and supply
  • Supply of system software for actuator control and data acquisition and processing
  • Training in system use at Rotadata or on customer site
  • Support during system installation
  • Support during engine testing
© Copyright 2019 Rotadata Limited. All rights reserved.